Bus Drop Support Grips
- Bus drop grips are woven of galvanized steel/304 Stainless Steel wire
- Relieve any direct tension from the critical connection and absorb vibration and flexing
- Offered with either the single eye or locking bale attachment
- Bus drop grips are used as cable support from bus duct
- Optional bus drop safety spring can be used with single eye type of disassembling draw bar from coll, placing through eye loop and replacing draw bar
- Single eye for use when cable is vertical and for applications where cable bends
- Locking bale attachment fits around beam or pipe and can be locked in place
Part Number | Cable Diameter | Bale Length | Mesh Length | Approx Break Strength |
HG-22 | 0.22-0.32"(5.6-8.1mm) | 9"(228.6mm) | 3.5"(88.9mm) | 1100 lbs. |
HG-30 | 0.30-0.43"(7.6-10.9mm) | 9"(228.6mm) | 4.5"(114.3mm) | 1100 lbs. |
HG-41 | 0.41-0.56"(10.4-14.2mm) | 9"(228.6mm) | 5.0"(127.0mm) | 1100 lbs. |
HG-53 | 0.53-0.73"(13.5-18.5mm) | 9"(228.6mm) | 6.5"(165.1mm) | 1100 lbs. |
HG-70 | 0.70-0.85"(17.8-21.6mm) | 9"(228.6mm) | 8.5"(215.9mm) | 1900 lbs. |
HG-82 | 0.82-1.00"(20.8-25.4mm) | 9"(228.6mm) | 8.5"(215.9mm) | 1900 lbs. |
HG-96 | 0.96-1.25"(24.4-31.8mm) | 9"(228.6mm) | 11.0"(279.4mm) | 1900 lbs. |